QUESTIONS? CALL (336) 227-2723

0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
Timken

RCJT 1-15/16 Bearing

Category Bearings
FFRCJT31
Timken

RCJT 1-15/16 Bearing

Item Code: FFRCJT31
Category Bearings

Description

Timken ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken suggests using Shaft Guarding Technology, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft. The cartridges are the same basic design as RCJ, TCJ, and LCJ types, except they have two bolt holes instead of four This series is primarily designed for applications where the mounting area is restricted The RCJT cartridge is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings. The TCJT is equipped with G-KPPB (Tri-ply seal) wide-inner-ring ball bearings. The LCJT is equipped with the G-KLLB (Mechani-Seal) wide-inner-ring ball bearings The units are factory pre-lubricated, but a grease fitting is provided for relubrication Safety end caps are available for selected sizes Series: industrial Shroud seal Ball bearing

Specifications

UNSPSC Code

31171504

Bearing Number

G1115KRRB

Bolt Hole Size

0.673" (17.1 mm)

Bolt Hole Spacing

6.189" (157.2 mm)

Bolt Size

5/8" (16 mm)

Brand

Timken

Category

Bearings

Center of Bearing from Housing End A2

0.044" (1.116 mm)

Collar

S1115K

Collar Width

0.103" (2.615 mm)

Dynamic Load Rating

8740 lb.f (38900 N)

Foot Height

0.500" (12.70 mm)

Housing

T-40226 (T-21418)

Housing Width

1.689" (42.9 mm)

Inside Ring Outside Diameter

2.728" (69.3 mm)

Overall Size

7.437" (188.9 mm) x 4.563" (115.9 mm) x 2.614" (66.4 mm)

Shaft Diameter

1 15/16" (49.2 mm)

Static Load Rating

5210 lb.f (23200 N)

UOM

EA

Starting from
$233.71 / EA
/
EA
LIST PRICE $233.71
%
- +
Change order preference in the cart.
Compare
Timken

RCJT 1-15/16 Bearing

Category Bearings
FFRCJT31
Timken

RCJT 1-15/16 Bearing

Item Code: FFRCJT31
Category Bearings

Description

Timken ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken suggests using Shaft Guarding Technology, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft. The cartridges are the same basic design as RCJ, TCJ, and LCJ types, except they have two bolt holes instead of four This series is primarily designed for applications where the mounting area is restricted The RCJT cartridge is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings. The TCJT is equipped with G-KPPB (Tri-ply seal) wide-inner-ring ball bearings. The LCJT is equipped with the G-KLLB (Mechani-Seal) wide-inner-ring ball bearings The units are factory pre-lubricated, but a grease fitting is provided for relubrication Safety end caps are available for selected sizes Series: industrial Shroud seal Ball bearing

Specifications

UNSPSC Code

31171504

Bearing Number

G1115KRRB

Bolt Hole Size

0.673" (17.1 mm)

Bolt Hole Spacing

6.189" (157.2 mm)

Bolt Size

5/8" (16 mm)

Brand

Timken

Category

Bearings

Center of Bearing from Housing End A2

0.044" (1.116 mm)

Collar

S1115K

Collar Width

0.103" (2.615 mm)

Dynamic Load Rating

8740 lb.f (38900 N)

Foot Height

0.500" (12.70 mm)

Housing

T-40226 (T-21418)

Housing Width

1.689" (42.9 mm)

Inside Ring Outside Diameter

2.728" (69.3 mm)

Overall Size

7.437" (188.9 mm) x 4.563" (115.9 mm) x 2.614" (66.4 mm)

Shaft Diameter

1 15/16" (49.2 mm)

Static Load Rating

5210 lb.f (23200 N)

UOM

EA

Starting from
$233.71 / EA
/
EA
LIST PRICE $233.71
%
- +
Change order preference in the cart.
Compare
SEARCH ×

javascript:;