QUESTIONS? CALL (336) 227-2723

0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
FFRCJ08
Timken

RCJ 1/2' Bearing ***

Item Code: FFRCJ08
Category Bearings

Description

Timken ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken suggests using Shaft Guarding Technology, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft. Timken cartridges are used in applications where a minimum amount of machining is to be done Each unit comes assembled and ready for mounting, with bolts through the flange These are wide-inner-ring ball bearings, self-aligning B-types, which compensate for shaft misalignment The RCJ flange cartridge is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings; The TCJ is equipped with G-KPPB (Tri-ply seal) wide-inner-ring ball bearings; The LCJ is equipped with the G-KLLB (Mechani-Seal) wide-inner-ring ball bearings The TCJ flange cartridges are identical to RCJ units, except they use the tri-ply seal bearing; Tri-ply units offer the best protection in dirty environments The units are factory pre-lubricated, but a grease fitting is provided for relubrication if required; the units are supplied with self-locking collars Contact a Timken engineer to discuss highly corrosive applications (food processing, chemical exposure) where Timken thin-dense chrome-coated bearings can be used Safety end caps are available for selected sizes Series: industrial

Specifications

UNSPSC Code

31171504

Bearing Number

G1008KRRB

Bolt Hole Size

0.394" (10 mm)

Bolt Hole Spacing

2.126" (54 mm)

Bolt Size

M10

Brand

Timken

Category

Bearings

Center of Bearing from Bearing End S

0.677" (17.2 mm)

Center of Bearing from Housing End A2

0.677" (17.2 mm)

Collar

S1008K

Collar Width

35/64" (13.9 mm)

Dynamic Load Rating

2380 lb.f (10700 N)

Foot Height

0.374" (9.5 mm)

Housing

T-40278 (T-16659)

Housing Width

0.929" (23.6 mm)

Inside Ring Outside Diameter

1.106" (28.1 mm)

Overall Size

3.000" (76.20 mm) x 3.000" (76.20 mm) x 1.598" (40.6 mm)

Seal Type

Shroud Seal

Shaft Diameter

1/2" (12.7 mm)

Shield Outer Diameter

2.063" (52.4 mm)

Static Load Rating

1070 lb.f (4700 N)

UOM

EA

Starting from
$93.43 / EA
/
EA
LIST PRICE $93.43
%
- +
Change order preference in the cart.
Compare
FFRCJ08
Timken

RCJ 1/2' Bearing ***

Item Code: FFRCJ08
Category Bearings

Description

Timken ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken suggests using Shaft Guarding Technology, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft. Timken cartridges are used in applications where a minimum amount of machining is to be done Each unit comes assembled and ready for mounting, with bolts through the flange These are wide-inner-ring ball bearings, self-aligning B-types, which compensate for shaft misalignment The RCJ flange cartridge is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings; The TCJ is equipped with G-KPPB (Tri-ply seal) wide-inner-ring ball bearings; The LCJ is equipped with the G-KLLB (Mechani-Seal) wide-inner-ring ball bearings The TCJ flange cartridges are identical to RCJ units, except they use the tri-ply seal bearing; Tri-ply units offer the best protection in dirty environments The units are factory pre-lubricated, but a grease fitting is provided for relubrication if required; the units are supplied with self-locking collars Contact a Timken engineer to discuss highly corrosive applications (food processing, chemical exposure) where Timken thin-dense chrome-coated bearings can be used Safety end caps are available for selected sizes Series: industrial

Specifications

UNSPSC Code

31171504

Bearing Number

G1008KRRB

Bolt Hole Size

0.394" (10 mm)

Bolt Hole Spacing

2.126" (54 mm)

Bolt Size

M10

Brand

Timken

Category

Bearings

Center of Bearing from Bearing End S

0.677" (17.2 mm)

Center of Bearing from Housing End A2

0.677" (17.2 mm)

Collar

S1008K

Collar Width

35/64" (13.9 mm)

Dynamic Load Rating

2380 lb.f (10700 N)

Foot Height

0.374" (9.5 mm)

Housing

T-40278 (T-16659)

Housing Width

0.929" (23.6 mm)

Inside Ring Outside Diameter

1.106" (28.1 mm)

Overall Size

3.000" (76.20 mm) x 3.000" (76.20 mm) x 1.598" (40.6 mm)

Seal Type

Shroud Seal

Shaft Diameter

1/2" (12.7 mm)

Shield Outer Diameter

2.063" (52.4 mm)

Static Load Rating

1070 lb.f (4700 N)

UOM

EA

Starting from
$93.43 / EA
/
EA
LIST PRICE $93.43
%
- +
Change order preference in the cart.
Compare
SEARCH ×

javascript:;