QUESTIONS? CALL (336) 227-2723

0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
FFRAK12
Timken

RAK 3/4' Bearing

Item Code: FFRAK12
Category Bearings

Description

Timken ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken suggests using Shaft Guarding Technology, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft. Heavier than our standard block with solid, flat feet for increased strength Compact, one-piece housing can be mounted in any position Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat Pre-lubricated and ready for immediate installation Grease fitting for relubrication Self-locking collars supplied with all units RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings, the TAK with G-KPPB (Tri-ply seal) wide-inner-ring ball bearings and the LAK with the G-KLLB (Mechani-Seal) wide-inner-ring ball bearings Contact a Timken engineer to discuss highly corrosive applications (food processing, chemical exposure) where Timken thin-dense chrome-coated bearings can be utilized Series: industrial Shroud seal Ball bearing

Specifications

UNSPSC Code

31171504

Base to Center Height

1.250" (31.75 mm)

Bearing Number

G1012KRRB

Bolt Hole Spacing

3.780" (96.0 mm)

Bolt L x W

0.795" (20.2 mm) x 0.437" (11.1 mm)

Bolt Size

3/8" (10 mm)

Brand

Timken

Category

Bearings

Center of Bearing from End S1

0.673" (17.1 mm)

Center of Bearing from End T

0.657" (16.7 mm)

Collar

S1012K

Dynamic Load Rating

3190 lb.f (14200 N)

Foot Height

13.5 mm

Housing

M96830

Housing Width

1.72" (43.7 mm)

Overall Size

5.000" (127.00 mm) x 1.311" (33.30 mm) x 2.531" (64.3 mm)

Ring Outside Diameter

1.665" (42.3 mm)

Shaft Diameter

3/4" (19.1 mm)

Static Load Rating

1460 lb.f (6500 N)

UOM

EA

Starting from
$97.57 / EA
/
EA
LIST PRICE $97.57
%
- +
Change order preference in the cart.
Compare
FFRAK12
Timken

RAK 3/4' Bearing

Item Code: FFRAK12
Category Bearings

Description

Timken ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken suggests using Shaft Guarding Technology, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft. Heavier than our standard block with solid, flat feet for increased strength Compact, one-piece housing can be mounted in any position Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat Pre-lubricated and ready for immediate installation Grease fitting for relubrication Self-locking collars supplied with all units RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings, the TAK with G-KPPB (Tri-ply seal) wide-inner-ring ball bearings and the LAK with the G-KLLB (Mechani-Seal) wide-inner-ring ball bearings Contact a Timken engineer to discuss highly corrosive applications (food processing, chemical exposure) where Timken thin-dense chrome-coated bearings can be utilized Series: industrial Shroud seal Ball bearing

Specifications

UNSPSC Code

31171504

Base to Center Height

1.250" (31.75 mm)

Bearing Number

G1012KRRB

Bolt Hole Spacing

3.780" (96.0 mm)

Bolt L x W

0.795" (20.2 mm) x 0.437" (11.1 mm)

Bolt Size

3/8" (10 mm)

Brand

Timken

Category

Bearings

Center of Bearing from End S1

0.673" (17.1 mm)

Center of Bearing from End T

0.657" (16.7 mm)

Collar

S1012K

Dynamic Load Rating

3190 lb.f (14200 N)

Foot Height

13.5 mm

Housing

M96830

Housing Width

1.72" (43.7 mm)

Overall Size

5.000" (127.00 mm) x 1.311" (33.30 mm) x 2.531" (64.3 mm)

Ring Outside Diameter

1.665" (42.3 mm)

Shaft Diameter

3/4" (19.1 mm)

Static Load Rating

1460 lb.f (6500 N)

UOM

EA

Starting from
$97.57 / EA
/
EA
LIST PRICE $97.57
%
- +
Change order preference in the cart.
Compare
SEARCH ×

javascript:;